Small Style Profil Locking Handles

• Ext. Saft = M10x1.5 Threaded Shaft fitted with 2 x Adjusting Nuts protruding internally 68 mm with 40mm of Tongue Adjustment
• Profile Lock = 40mm or 45 mm Half Cylinder Profile Lock. (Ask us about our Range and Keying Options)

Swing Handle Fully Flush Mounted

Central Locking S/Handle

• Electrically Actuated
• For Connection to Automotive Central Locking System
• Emergency Mechanical Key Overide
• For More Than 2 Handles Per System Use Relay Module Part Part Number:  1107SCCU3-EL-RE
• 2 Wire Connection - 12 Volt DC Standard (Other Voltages avialable upon request)

Slimline Handles

• IP 65
• 4 point locking possible
• Lock can be mounted outside the sealing area
• EMC compliant
• Fits a 45mm high security cylinder (BI LOCK and ABLOY - Salt Water Tested)
• Fits a 40mm cylinder half profile
• Stainless Steel (304) Brushed
• Flush fitting (approx 5mm protrusion)
• Aesthetically pleasing

Swing Handle with Dish

• Easy to install with simple cut
• Dish made of Stainless Steel
• Polished finish
• Minimal handle protrusion
• For use with any 1107- - U3 Handle
• Available in Central Locking Style
• Gasket to suit - Part P2579-650-17
• Spring Loaded action gives clear indication of unlocked state

Large Style Padlockable Handles

Small Style Padlockable Handles

Stainless Steel Swing Handle